Construction and visible-light photocatalytic performance of carboxyethyltin/transition metal–functionalized wheel-like tungstophosphates

The wheel-like tungstophosphate ([P₈W₄₈O₁₈₄]⁴⁰⁻, abbreviated as P₈W₄₈) reacted with estertin trichloride (Cl₃SnRCH₃, R = CH₂CH₂COO) in aqueous solution, resulting in a new wheel-like polyoxometalate (POM) containing six SnR fragments, formulated as K₆Na₂₄[{(SnR(H₂O))₂(μ-OH)(μ-SnR(H₂O))}₂(P₈W₄₈O₁₈₄)]·59H₂O (abbreviated as Sn ₆ - P ₈ W ₄₈ ). Based on this, the transition metal (TM) was further introduced into the Sn ₆ - P ₈ W ₄₈ system, self-assembling three other wheel-like POMs with the general formula K_xNa_yH_{26 − x − y}[{TM(H₂O)₃(SnR(H₂O))₂(μ-OH)(μ-SnR(H₂O))}₂(P₈W₄₈O₁₈₄)]·nH₂O (abbreviated as TM ₂ - Sn ₆ - P ₈ W ₄₈ , TM = Mn, Co, Ni; x = 0, 1, 2; y = 19, 22, 15; n = 72, 85, 75, respectively). The structures of these new organometal and TM co-modified compounds were characterized using infrared, UV–Vis. spectroscopy, ¹¹⁹Sn NMR, and powder- and single-crystal X-ray diffraction analysis. The estertin precursor hydrolyzed into carboxyethyltin (SnR) fragment in these crystalline POM materials, which can improve their adhesion to titanium dioxide (TiO₂). The photocatalytic performance of Sn ₆ - P ₈ W ₄₈ , TM ₂ - Sn ₆ - P ₈ W ₄₈ , and their TiO₂ composites was examined by studying the degradation of a model dye pollutant Rhodamine B (RhB) under visible-light irradiation without adding hydrogen peroxide (H₂O₂), and the photocatalytic mechanism was also discussed. The experimental results show that the title compounds exhibit a quicker and better photocatalytic degradation effect on RhB compared with their parent compound, indicating that the introduced organotin groups play a significant role. Moreover, it was found that H₂O₂ was produced after illumination pretreatment for POM solution, promoting the photocatalytic reaction.     

Global optical model potential describing 12C-nucleus elastic scattering

We construct a new global optical model potential to describe the elastic scattering of ¹²C. The experimental data of elastic-scattering angular distributions and total reaction cross sections for targets from ²⁴Mg to ²⁰⁹Bi are considered below 200 MeV within the framework of the optical model. The results calculated using the derived global optical potential are then compared with the existing experimental data. The reliability of the global optical potential is further tested by predicting the elastic scattering data out of the mass and energy ranges, within which the global potential parameters are determined, and reasonable results are also obtained.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

Afterglow Implant for Arterial Embolization and Intraoperative Imaging

Transcatheter arterial embolization (TAE) is wildly used in clinical treatments. However, the online monitoring of the thrombosis formation is limited due to the challenges of the direct visualization of embolic agents and the real-time monitoring of dynamic blood flow. Thus, we developed a photochemical afterglow implant with strong afterglow intensity and a long lifetime for embolization and imaging. The liquid pre-implant injected into the abdominal aorta of mice was rapidly transformed into a hydrogel in situ to embolize the blood vessel. The vascular embolism position can be observed by the enhanced afterglow of the fixed implant, and the long lifetime of afterglow can also be used to monitor the effect of embolization. This provides an excellent candidate in bio-imaging to avoid the autofluorescence interference from continuous light excitation. The study suggests the potential usefulness of the implant as an embolic agent in TAE and artery imaging during a surgical procedure.     

Practical algorithm substitution attack on extractable signatures

Designs, Codes and Cryptography - An algorithm substitution attack (ASA) can undermine the security of cryptographic primitives by subverting the original implementation. An ASA succeeds when it...     

Experimental study on the two-phase flow pattern and transformation characteristics of a flow mixing nozzle under a moderate flow rate

Meccanica - A flow mixing nozzle can produce satisfactory atomization for heavy oil. However, the study of the internal flow pattern of this nozzle, along with the spray morphology and its...     

Highly stable polyoxometalate‐resorcin[4]arene‐based inorganic‐organic complexes for catalytic oxidation desulfurization

Self‐assembly of a resorcin[4]arene‐based ligand (TMR4A) with metal salts and H₃PMo₁₂O₄₀·xH₂O offers two isostructural complexes, namely, [Ni₂Cl(TMR4A)₂(CH₃CN)₂]·[PMo₁₂O₄₀]·4CH₃CN ( 1 ) and [Co₂Cl(TMR4A)₂(CH₃CN)₂]·[PMo₁₂O₄₀]·4CH₃CN ( 2 ). In both 1 and 2 , one Cl^? anion bridges two metal cations, and each metal cation is further chelated by four 2‐mercaptopyridine N‐oxide groups of one TMR4A, producing a [M₂Cl(TMR4A)₂]³⁺ dimer (M = Ni or Co). The negative [PMo₁₂O₄₀]^3? as a counter‐anion balances the positive charge. Markedly, 1 and 2 exhibit high stability in aqueous solutions with different pH values and in organic solvents. Remarkably, the efficient heterogeneous catalytic capability for oxidative desulfurization was studied by suing 1 and 2 as recycled catalysts. Moreover, the electrochemical behaviors of the two compounds were discussed as well.